|
|
Contents |
In this newsletter:
|
Current News |
RLI Announces Holiday Schedule
We will be closed this year from 2:00pm December 21 through January 1, 2019 to be with family. We will open again on January 2, 2019. In-stock orders placed by end of business day on December 20, 2018 will be shipped by end of day Friday.
We wish you and your families a happy and healthy Holiday Season.
|
Upcoming Laser Safety Training Courses |
Developed and taught by the leading experts in the field, RLI training courses have been recognized as the best in the industry.
RLI also offers Online Industrial Laser Safety Courses and On-site Industrial Laser Safety Officer Courses that can be held at your facility.
For more information regarding our training courses, please contact a training representative via email or call us at (800) 94-LASER.
|
Our Signature Course: |
L-222 Laser Safety Officer |
4 Days |
This intermediate level course provides an in-depth, analytical
review of the LSO duties and requirements of ANSI Z136.1, OSHA, FDA-CDRH and
state laser standards. After a review of the biological basis, the student will
complete an in-depth computation workshop that covers MPE, AEL, NHZ and OD
factors.
Course Dates:
|
|
Feb 19 - 22, 2019 |
|
Phoenix, AZ |
|
|
Jun 25 - 28, 2019 |
|
Raleigh-Durham, NC |
|
|
|
|
|
|
Visit the RLI website for additional course offerings coming soon. |
|
|
Additional Courses: |
L-113 Principles of Lasers |
1 Day |
This one-day introductory course is designed for those responsible
for operating and maintaining laser systems, providing a solid introduction to
lasers. It also provides a knowledge base for those who plan to continue their
professional development and will be attending the Laser Safety Officer (LSO)
course. In addition, the course benefits those who have management
responsibility for lasers and/or laser safety.
Course Dates: |
|
Feb 18, 2019 |
|
Phoenix, AZ |
|
|
Jun 24, 2019 |
|
Raleigh-Durham, NC |
|
|
______________________________________________________________ |
L-250 Principles of Lasers & Laser Safety Officer Course |
5 Days |
This five-day course is designed for those persons designated as the Laser Safety Officer (LSO) for their facility who also need a solid introduction to lasers. The first day of the course provides a general overview of types of lasers and how laser light differs from that produced by the sun and other "ordinary" light sources. The participant also learns about laser operation, terminology and beam properties. Common types of lasers including specific gas, solid-state, and diode lasers are discussed and an overview of laser optics and beam delivery systems is included. The discussion of basic laser operation emphasizes those laser characteristics that are important for the LSO to understand in order to perform the laser hazard evaluation. The next four days of the course consist of an in-depth, analytical presentation of the LSO’s duties and requirements according to ANSI Z136.1, OSHA, FDA-CDRH and state laser standards. After a review of the biological basis, the student will complete an in-depth computational workshop that covers MPEs, AELs, NHZs and ODs. An in-depth discussion of the control of laser hazards is provided.
Course Dates:
|
|
Feb 18 - 22, 2019 |
|
Phoenix, AZ |
|
|
Jun 24 - 28, 2019 |
|
Raleigh-Durham, NC |
|
|
______________________________________________________________ |
L-240 Measurements for Laser Safety |
2 1/2 Days |
This hands-on course will teach you how to perform laser safety measurements according to applicable laser safety standards. The course will focus on workshop exercises that are designed to make maximum use of laser output measurement equipment in solving real-world laser measurement problems.
Course Dates:
|
|
Jun 24 - 26, 2019 |
|
Raleigh-Durham, NC |
|
|
Product Focus |
Laser Barriers and Curtains
RLI’s Laz-R-Shroud™ and Laz-R-Barriers™ product lines provide total protection against beams emitted and scattered from various laser sources. Our laser barriers are fabricated with tested materials that exhibit a high tolerance to incident laser beams of up to 300 W/cm2 for exposures up to 100 seconds.
RLI provides a complimentary barrier analysis tailored to your specifications with every quotation so you can be sure your barriers will do the job when it counts. RLI provides testing data and rating information about the barrier material you plan to purchase.
For more information regarding laser barriers and curtains, please contact George Gigous via email or by calling (800) 94-LASER.
|
Featured Consulting Service |
Laser Enclosure Design and Manufacturing
RLI offers custom design and manufacturing of laser enclosures for either manually operated or fully automated installations.
RLI can also assist those producing their own enclosures to ensure that all proper regulations and control measures are satisfied.
Services include:
|
• |
Complete Design Engineering, Manufacturing and/or Installation
|
|
• |
Review of client's existing design and/or installation
|
|
• |
Certification, as appropriate, to 21 CFR / ANSI Z136
|
|
• |
Design criteria includes conformity with ANSI B11.21 Safety Requirements For Machine Tools Using A Laser For Processing Materials and IEC/ISO 11553 Safety of Machinery - Laser Processing Machines
|
|
• |
Industrial capabilities include mechanical & electronic interface for interlocks and other safety features & controls
|
For more information regarding our enclosure design and manufacturing, please contact
Nancy Mauro via email or by calling (800) 94-LASER.
|
More Information on RLI |
For more information regarding our laser safety products, training courses and consulting services, please contact us by email, or call us at (800) 94-LASER.
|
|
Rockwell Laser Industries
7754 Camargo Road
Cincinnati, OH 45243
Tel: (800) 94-LASER
Int'l: +1 (513) 272-9900
www.rli.com
|
|
|
|